- What "Passing Score" Means for JN0-352
- Why Juniper Does Not Publish a Number
- Where You Actually Find Your Threshold
- Format Facts That Shape Your Score
- When Results Become Official
- Numbers You Will See That Are Not the Passing Score
- Spending Study Time Across Nine Unweighted Headings
- If You Miss: Retake and Renewal Rules
- A Domain-Ordered Four-Week Plan
- Frequently Asked Questions
- Juniper does not publicly publish the JN0-352 passing score; your score report shows the threshold for your test.
- The exam has 65 multiple-choice questions in 90 minutes, with no published scored/unscored split.
- The 70% figure tied to the Open Learning course voucher assessment is not the JN0-352 passing score.
- Pass/fail appears immediately but is provisional until security validation, with results posted within three business days.
What "Passing Score" Means for JN0-352
If you are searching for the exact percentage or scaled number that earns the Juniper Networks Certified Specialist, Enterprise Routing and Switching (JNCIS-ENT) credential, here is the direct answer: the passing score is not publicly published. This is stated by the current Certification Program Policies, and it applies to the JN0-352 written exam, which targets Junos 23.1.
That can feel unsatisfying, especially if you came from a vendor ecosystem that prints a cut score on the exam page. But it changes how you should prepare. Instead of aiming at a magic number, you aim at consistent, broad command of every objective area. This article explains what is known, what is not, and how to turn that uncertainty into a sound preparation strategy. If you are still deciding whether the exam is the right fit, the overview of what JNCIS-ENT certification is is a good starting point.
Why Juniper Does Not Publish a Number
The Certification Program Policies explain that passing thresholds are not publicly posted and that thresholds can differ between tests. The policies do not give a full rationale beyond that, so any explanation of the reasoning would be speculation. What you can reliably take from the policy is the practical consequence: do not anchor on a single remembered percentage, and do not assume that a number you hear from a colleague about a different Juniper exam, or even an older code, carries over.
This is especially relevant because the exam has moved between codes over time. Material written for earlier codes such as JN0-351 is a historical reference, not a statement about JN0-352. Treat a score someone reports for an older exam as anecdote, not policy.
Where You Actually Find Your Threshold
The one authoritative place the threshold shows up is your individual exam score report. Per the program policies, that report includes the passing threshold applicable to your test, alongside your result. That means the threshold is knowable, but only after you have attempted the exam.
For a failed attempt this is genuinely useful. The score report is your best feedback artifact: it tells you how far you were from the line and gives you a data point for deciding how much remediation you need before the retake. Keep a note of what you saw, including which objective areas felt weakest when you review your memory of the session.
Key Takeaway
Plan to pass with margin rather than to scrape a threshold you cannot see in advance. Because the cut line is unpublished, the safest target is solid, balanced competence across all nine headings, not a gamble on guessing which topics matter most.
Format Facts That Shape Your Score
While the threshold is hidden, the delivery details are clear. Knowing them lets you manage the part of the outcome you control: time and accuracy.
| Item | JN0-352 Detail |
|---|---|
| Certification | Juniper Networks Certified Specialist, Enterprise Routing and Switching (JNCIS-ENT) |
| Exam code and software | JN0-352, Junos 23.1 |
| Number of questions | 65 |
| Time allowed | 90 minutes |
| Format | Multiple-choice written exam |
| Delivery | Pearson VUE test center or OnVUE online proctoring |
| Language | English only |
| Passing score | Not publicly published; shown on your score report |
| Fee | Not verified here; confirm through the official Pearson VUE channel |
Sixty-five questions in 90 minutes works out to a little under 1 minute 25 seconds per question if you spread time evenly. The exam page does not state how many items are scored versus unscored, so do not assume any question is "free." Treat each one as counting.
On cost, the official voucher store did not load during our last verification attempt, so we do not quote a price here. For the best available breakdown and the caveats around it, see the JNCIS-ENT certification cost guide, and confirm the current amount directly with the provider before you book.
The prerequisite gate
You cannot simply book the exam on knowledge alone. An active JNCIA-Junos certification is explicitly required to satisfy the prerequisite under the current recertification policy; equivalent knowledge is not a substitute. If your JNCIA-Junos has expired, it cannot satisfy the prerequisite. The full eligibility picture is covered in JNCIS-ENT requirements and how to qualify.
Online versus test center
If you choose OnVUE, the program page requires a system check, a private and appropriate testing environment, matching government-issued photo identification, and no books or notes. No blanket pre-approved allowances are listed, and you should not assume a calculator or scratch aid is permitted unless the provider states it. Do the system check well before exam day so a technical problem does not eat into focus you need for 65 questions.
When Results Become Official
The exam page says pass/fail status is available immediately after you finish. However, current policies explain that written results are provisional pending security validation. Valid results are posted to CertMetrics within three business days. In practice, this means you will see an on-screen outcome right away, but you should treat it as final only once it is validated and posted.
This matters if you are planning around a job application, a promotion review or a deadline. Build in a few business days of buffer before you tell anyone the credential is formally earned. For scheduling considerations in general, see the JNCIS-ENT exam dates and scheduling guide.
Numbers You Will See That Are Not the Passing Score
A lot of confusion around "passing score" comes from unrelated numbers circulating in the same search results. Keep these straight:
- The 70% voucher-assessment threshold. The issuer's Open Learning course page advertises free course access and a 70% threshold for a voucher assessment. That is a course-related threshold. It is not the JN0-352 certification exam's passing score, and it is not its price or a pass rate.
- The 65 questions and 90 minutes. These describe exam length and timing. They are not a passing score and not a statement that you must answer a certain number correctly.
- The count of 88 objective bullets. This is an audit count of the published objective entries, not a weighting and not a question distribution. The nine headings carry no published percentages.
- Pass rates. No verified published cohort pass rate was found, and the unpublished threshold must not be turned into one. For what can and cannot be said, read the JNCIS-ENT pass rate analysis.
- Other credentials' cut scores. Several certifications share similar acronyms or sit in adjacent Juniper tracks, such as the data-center, service-provider and cloud specialists. Their rules do not apply here.
Spending Study Time Across Nine Unweighted Headings
Because the passing score is hidden and the published outline gives no percentage weights for the nine headings, you cannot responsibly calculate "I can skip this domain and still pass." The issuer also describes the outline as a high-level skillset view rather than an exhaustive task analysis. The sensible approach is to cover everything and weight your time by your own weak spots and by topics that are easy to confuse. The full breakdown lives in the JNCIS-ENT exam domains guide.
Domain 1: Layer 2 Switching or VLANs
Expect both concepts and configuration/monitoring/troubleshooting of switching in Junos OS.
- Bridging components and frame processing
- VLAN ports, tagging, native and voice VLANs
- Inter-VLAN routing and how you would verify it
Domain 2: Spanning Tree
STP and RSTP both appear, conceptually and operationally.
- Port roles and states, and BPDUs
- Convergence and reconvergence behavior
- Configuring and troubleshooting STP versus RSTP
Domain 3: Layer 2 Security
This domain is broad. Do not skim it.
- BPDU, loop and root protection
- Port security: MAC limiting, DHCP snooping, dynamic ARP inspection, IP source guard
- MACsec and storm control
- Layer 2 firewall filters: types, processing order, match criteria and actions
Domain 4: Protocol Independent Routing
Routing concepts that sit under every protocol.
- Static, aggregate and generated routes
- Martian addresses, routing instances and RIB groups
- Load balancing and filter-based forwarding
Domains 5, 6 and 7: OSPF, IS-IS and BGP
The three routing protocol headings each pair concepts with configuration and troubleshooting.
- OSPF: link-state database, packet types, DR/BDR, area and router types, realms, LSA types
- IS-IS: PDUs, TLVs, levels and areas, DIS, metrics
- BGP: message types, attributes, path selection, IBGP versus EBGP interaction
- Troubleshooting tools listed for each: ping, traceroute, traceoptions, show commands and logging
Domain 8: Tunnels
A compact heading that is easy to under-study.
- Tunneling applications and considerations
- GRE and IP-IP concepts and configuration
Domain 9: High Availability
Many distinct technologies share this heading, so breadth matters.
- LAG, RTG, virtual chassis
- Graceful restart, GRES, NSR, NSB, BFD, VRRP and unified ISSU
- Troubleshooting uses traceoptions, show commands and logging
Two scope details are worth noting. First, BFD is listed in the high-availability concepts but is not repeated in the configuration bullet list. Second, the high-availability troubleshooting list names traceoptions, show commands and logging only, whereas OSPF, IS-IS, BGP and Tunnels also name ping and traceroute. Study to the published lists rather than assuming they are identical. IS-IS in particular is frequently found in older ENT and SP study notes; use those for concepts but verify against the current objectives. For a candid view of effort, see how hard the JNCIS-ENT exam is.
If You Miss: Retake and Renewal Rules
Not knowing the threshold makes the retake policy more important to understand. For the written exam:
- There is no waiting period after the first failed attempt.
- After a second or subsequent failure, you must wait 14 calendar days, beginning the following day.
- After passing, you must wait at least 18 months before taking the same exam again.
These are written-exam rules and should not be confused with any lab-exam policy. Because you can retake immediately after a first miss, the score report becomes a fast feedback loop, though rushing back without fixing gaps is rarely wise.
Keeping the credential current
The certification is valid for three years. You can renew before expiry through an appropriate current-level exam, a higher-level certification in the same track, or the specified or higher-level course route in the same track. The retrieved recertification page does not expose a complete approved-course list or any numeric continuing-education requirement, so none is stated here. An expired certification cannot satisfy prerequisites or be renewed from its expired level; the track must be re-earned from the beginning. If you are weighing the long-term value, whether the JNCIS-ENT is worth it addresses return on investment without inventing figures.
A Domain-Ordered Four-Week Plan
Since the threshold is opaque, the goal is balanced coverage with extra attention to the denser, easily confused areas. This plan assumes you already hold an active JNCIA-Junos and are building on that foundation. For a fuller roadmap, see the JNCIS-ENT study guide.
Layer 2 foundations
- Domains 1 and 2: VLANs, tagging, inter-VLAN routing, STP and RSTP roles and states
- Work through BPDU behavior and reconvergence until you can explain it from memory
Layer 2 security and routing basics
- Domain 3 in full, including MACsec and each port-security feature
- Domain 4: aggregate and generated routes, RIB groups, filter-based forwarding
The routing protocols
- Domains 5, 6 and 7: OSPF LSA types and realms, IS-IS levels and TLVs, BGP attributes and path selection
- Practice reading show output and matching it to the protocol state
Tunnels, availability and review
- Domain 8 and Domain 9, including BFD, VRRP and unified ISSU
- Timed practice sets at roughly 85 seconds per question, then revisit your weakest headings
Keep your preparation aligned to Junos 23.1. Some self-paced courses reference module software that differs from the selected exam version, and certain video courses still carry the earlier JN0-351 label, so prefer material that matches JN0-352. When you want a quick recall aid late in the process, the JNCIS-ENT cheat sheet condenses the must-know facts. You can also test your knowledge with timed questions on the main practice test site. These are independent knowledge-preparation materials, not actual exam questions, and answering them well does not prove hands-on competence.
Frequently Asked Questions
It is not publicly published. According to the current Certification Program Policies, the individual score report includes the threshold, and thresholds can differ between tests. Any specific percentage you see quoted elsewhere is unverified for this exam.
No. The 70% figure is tied to the course's voucher assessment. It is not the JN0-352 certification exam's passing score, price or pass rate, so do not use it as your target.
There are 65 multiple-choice questions and 90 minutes. The exam page does not state a scored versus unscored split, so treat every question as counting toward your result.
Pass/fail is available immediately, but written results are provisional pending security validation. Valid results are posted to CertMetrics within three business days, so wait for that posting before treating the credential as formally earned.
There is no waiting period after a first failed attempt. After a second or subsequent failure, you wait 14 calendar days beginning the following day. These rules apply to the written exam, and a passed exam cannot be retaken for at least 18 months.
The bottom line: the number you most want to know is intentionally not available in advance, so build your plan around full coverage of all nine headings, verified prerequisites, and careful use of your score report if a retake is ever needed.